Silverado / Sierra 1500 Fog Light Wiring Adapters LED to Deutsch/LED - Set (2017-2019)

Looking for a way to connect LED cube lights to your 2017-2019 Silverado/ Sierra without removing your factory fog lights or installing a separate wiring harness? Now available is a plug-n-play solution from Starkey. This wiring adapter will connect Deutsch 2-pin connectors to your factory fog light wiring without the need to disconnect your factory fog lights! Skip the hassle of installing a separate wiring harness for LED cube lights with these simple adapters!

Direct fit for all 2017-2019 Chevrolet Silverado & GMC Sierra 1500 trucks with factory LED fog lights on the Legacy Body platform. If you have a 2019 Silverado/ Sierra with the New Body-Style, please see Starkey SKU# 5011-2.

Please note: If your Silverado or Sierra has halogen fog lights, these adapters will not work.

If you only need to connect a total of 2 LED cube lights, see Starkey #5017

Do you need to connect 4 LED cube lights? See Starkey #5017DUAL

Features and Benefits:

• Only OEM quality connectors & wire are used – don’t settle for anything less!
• No cutting or splicing required – just plug the new adapters in and you’re done.
• Adapter connects to factory Molex bulb and splits into Molex connector/ Deutsch DT Series 2-pin connector.
• Assembled in USA!
• 40 inch adapters give you flexibility in mounting your LED lights.

• 2017-2018 Chevrolet Silverado 1500 with factory LED fog lights
• 2019 Chevrolet Silverado 1500 Legacy Body-Style  – If you have New Body-Style, See Starkey SKU# 5011-2
• 2017-2018 GMC Sierra 1500 with factory LED fog lights
• 2019 GMC Sierra 1500 Legacy Body-Style  – If you have New Body-Style, See Starkey SKU# 5011-2
• Other models that utilize the Molex MX150 series fog light bulb connector

What’s Included:

• One set (two 40 inch adapters) with weatherproof connectors
• Zip-ties to secure all wiring
• 5 Year Limited Warranty

Installation:

• Installation difficulty = Very Low
• Installation time = 5 minutes
• Tools required = None

Technical Specifications:

• Works with virtually all aftermarket LED cube lights drawing less than 2.5 amps per light. Off-road use only.

*Depending on brand of LED cube lights used, the polarity of the wiring adapters may need to be reversed. No special tools are required. Instructions on reversing the polarity of the adapters are included with product.